Thursday, September 5, 2013

433 MHz ASK RF Transmitter Receiver Module

New 433 MHz ASK RF Transmitter Receiver Module with HT12E+HT12D (4Bit Encoder+Decoder IC)200 Meters Long Range*

*200 Meters Long Range in STANDARD LINE OF SIGHT , Suitable for Wireless Remote Robot Control etc.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiZaEfOtxcw72g0u5HFp63mWsu9S_AX2rPzmU67QLh5anLA1YPNN1aKt7hQE1HeAZKOTJcb8bA45Uf0d5NUQYWOab0fTIIrcTk9Ut7YjzPF6AzljDkwQWPggmj16Ivoa3Yw7gyxOO1u9x0/s1600/433Mhz_RxTx_Module.jpg

Specification

Range in open space(Standard Conditions) : 200 Meters

RX Receiver Frequency : 433 MHz

RX Typical Sensitivity : 105 Dbm

RX Supply Current : 3.5 mA

RX IF Frequency : 1MHz

Low Power Consumption

Easy For Application

RX Operating Voltage : 5V

TX Frequency Range : 433.92 MHz

TX Supply Voltage : 3V ~ 6V

TX Out Put Power : 4 ~ 12 Dbm

Wednesday, September 4, 2013

PICKIT3 USB Programmer Debugger TPS-01307

TPS-01307

Microchip PICKIT3 USB Programmer/Debugger (USB Cable free)

Product Description PICkit 3 Features USB...

Microchip PICKIT3 USB Programmer/Debugger (USB Cable free)

PICkit 3 Features

USB (Full speed 12 Mbits/s interface to host PC)
Real-time execution
MPLAB IDE compatible
Built-in over-voltage/short circuit monitor
Firmware upgradeable from PC/web download
Totally enclosed
Supports low voltage to 2.0 volts (2.0v to 6.0v range)
Diagnostic LEDs (power, busy, error)
Read/write program and data memory of microcontroller
Erase of program memory space with verification
Freeze-peripherals at breakpoint
Program up to 512K byte flash with the Programmer-to-Go

The MPLAB PICkit 3 allows debugging and programming of PIC^® and dsPIC^® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).

Pakcage List:

1 PICKIT3 (oem)

1 USB cable

1 6pin cable

Download MPLAB IDE v8.70

Download stand-alone programmer application for the PICkit 3 here