Monday, April 1, 2013

USB to Serial UART / TTL Converter, 3.3V / 5V Logic Lavel ,for Embedded Projects

USB to Serial UART / TTL Converter with USB Cable , Support 3.3V / 5V Logic Lavel ,for Embedded Projects


The Converter is easiest way ever to connect to your Arduino/PIC/NXP/8051/AVR/microcontroller/Raspberry Pi/WiFi router serial console port.




USB Connector Cable (Included) : Type B (Commonly used in Printer /Scanner )


PIN SPECIFICATION
  •  Power
  •  Ground
  •  RX
  •  TX
  •  DTR
 The power pin provides the 5V @ 500mA (Restricted @100mA to safe USB port) direct from the USB port and the RX/TX pins are 3.3V level which support interfacing with the most common 3.3V / 5V logic level chipsets.

Because of the separated pin plugs, this cable is ideal for powering and connecting up to the debug/login console on the Raspberry Pi. Connect the pins as shown to power the Pi and establish the RX/TX link. Then install the Windows XP/Vista/7 or MacOS X PL2303HX.A drivers on your computer and connect with a terminal program at 115200 baud. Windows 8 is not supported.

Download Drivers

DriverInstaller_v1.7.0.zip
USB_to_RS232_Driver_Installer.zip
USB_To_RS232_Driver.rar

For more assistance call :+91-9826015410 ,9826050109

2 comments: